0.4-2.2Hp Power Peripheral Water Pump KF Series Vortex Type 2850Rpm
Speed
Peripheral Water Pump
Peripheral Water Pump Description
The vortex water pump consists of three parts: electric motor,
pump, and seal. The motor is an asynchronous rotor shaft in
stainless steel with a seal for life bearings, and the pump is a
peripheral impeller made of brass material, and the structure is a
swirling type. These pumps are manufactured in this manner because
several radial blades at the end of the impeller provide more
energy for the pumped liquid. In addition, the special shaping of
the blades creates a rapid radial recovery movement of fluid
between the blades of the impeller and the pump body.
The KF electric motor water pump series products meet the
requirements of domestic accessories and can be distributed through
small autoclaves or water polo units. Pumps are generally supplied
with water, pressurized water using pressure vessels (autoclaves),
horticultural irrigation, atomized irrigation, booster showers,
dairy and farm applications, garden watering applications, only
emptying and filling the tank to clean the liquid to make the pump
The function is normal, only use clean water or non-corrosive
liquid, no sand or other solid impurities. The ZOZHI water pump is
suitable for home applications such as well, pools and other water
supplies. If combined with other equipment, it is also suitable for
water pressure boosting gardening and automatic water supply
systems.
Peripheral Water Pump Application
Treat clean water without abrasive particles and fluids that are
not chemically corrosive to pump components. It is suitable for
water supply for family life, watering Huanong to distribute water
automatically, and is a good tool for farms, nurseries, orchards,
and tea gardens.
Peripheral Water Pump Data ( 220V/50HZ )
| Type | Power KW HP | Input max KW | Q.Max (L/min) | H.Max (m) | Speed (r.p.m) | Suction. Max (m) | 0 | 1.32 | 2.64 | 4 | 5.28 | 6.61 | 7.93 | 9.25 | 10.6 | 13 | 17 | 18 | 23.8 |
| 0 | 1.1 | 2.2 | 3.3 | 4.4 | 5.5 | 6.6 | 7.7 | 8.8 | 11 | 14 | 15 | 19.8 |
| 0 | 0.3 | 0.6 | 0.9 | 1.2 | 1.5 | 1.8 | 2.1 | 2.4 | 3 | 3.9 | 4.2 | 5.4 |
| 0 | 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 50 | 65 | 70 | 90 |
| KF0 | 0.30 | 0.40 | 0.50 | 30 | 24 | 2850 | 9 | 24 | 21 | 18 | 15 | 11.5 | 8 | 5 | | | | | | |
| KF1 | 0.37 | 0.50 | 0.55 | 35 | 35 | 35 | 31 | 25.5 | 21 | 17 | 12 | 8 | 4 | | | | | |
| KF2 | 0.55 | 0.75 | 0.80 | 50 | 55 | 55 | 51 | 47 | 43 | 38 | 33 | 27.5 | 22 | 16.5 | 5 | | | |
| KF3 | 0.75 | 1.00 | 1.10 | 65 | 60 | 60 | 56 | 52 | 48 | 43.7 | 39.7 | 34.5 | 30 | 25 | 16 | 5 | | |
| KF4 | 0.75 | 1.00 | 1.10 | 50 | 70 | 70 | 65 | 58.5 | 42 | 46 | 39.8 | 34 | 27.5 | 21 | 7 | | | |
| KF5 | 1.10 | 1.50 | 1.50 | 70 | 70 | 70 | 65 | 61 | 57 | 52 | 47.7 | 43 | 39 | 35 | 26 | 11 | 6 | |
| KF6 | 1.50 | 2.20 | 2.30 | 90 | 70 | 70 | 66 | 62 | 59 | 55.5 | 52.2 | 48.5 | 45.3 | 42 | 35 | 25 | 21 | 5 |
Peripheral Water Pump Construction
Pump
Pump Body: Cast iron/Brass/Stainless steel
Impeller: Brass
Mechanical Seal: Carbon
Frant Cover: Cast iron
Motor
Single Phase
Heavy-Duty Continuous Work
Motor Housing: Aluminum
Shaft: Carbon Steel
Insulation: Class B / Class F
Protection: IP44 / IP54
Cooling: External Ventilation
Construction and safety standards in compliance with IEC
220V/50HZ.60HZ 110V/50HZ.60HZ 220v.110v/50hz.60hz are available on
request.
Peripheral Water Pump Use Precautions:
Before preparing to install the pump, first check whether the
firmware of each part is loose or not. There is no foreign matter
jam in the pump flow path to avoid the situation that you cannot
clean it after the later installation. Next, check the water source
and water level before use. For the pump to work properly, you
should install it in a covered area or a closed environment. Avoid
using pumped water or non-corrosive liquids, and no sand or other
solid impurities.
STRUCTURAL CHARACTERISTICS
| Main Specification | Standard | Optional |
| Transmission medium | Vortex Water | |
| Pump body | Cast Iron | |
| Impeller | Brass | |
| Motor housing | Aluminum | |
| Stator&Rotor | 1.Cold-rolled silicon steel sheet by high-speed punching machine.
2. 100% high-quality copper wire |
| Front cover | Cast Iron | Brass plate embedded to avoid impeller jam |
| Bearing | Chinese Best Quality Bearing | NSK, SKF, or on request |
| Mechanical seal | Graphene/Ceramic | Silicon Carbon |
| Shaft | Carbon Steel | Stainless Steel |
| Insulation | Class B | Class F |
| Protection | IP44 | IP54 |
| Voltage | 220-240V Single Phase | On Request |
| Frequency | 50HZ | 60HZ |
| thermal protection | No | Yes |
| Automatic Pressure Control System | No | Yes |
| Cooling Type | External Ventilation | |
| Max. Suction lift | 9M | |
| Max. Fluid Temperature | +60℃ | |
| Max. Environment Temperature | +40℃ | |
| Installation | Horizontal | |
| Connect Type | Thread | |
| CONSTRUCTION AND SAFETY STANDARDS in compliance with IEC |
Peripheral Water Pump
GUARANTEE
Guarantee for one year from shipped on board date. During the
guarantee period, our company will provide free easy-damaged spare
parts for problems caused by our quality of production or raw
material, except the damageable spare parts caused by the
customer's incorrect artificial operation. In addition, after
expiration, our company provides cost spare parts for maintenance.
OUR SERVICE
1. Directly factory sale
2. Quick response to 2-8hours, response rates over 92%
3. 24 hours phone call is available. Feel free to contact us.
4. All goods produced by ourselves, we provide one-stop services
from designing, printing to processing. Customers can provide the
design according to your request and sample making. Also, we can
advise how to make the products according to customers' target
prices.
FAQ
1. Q: What’s the MOQ?
A: Trial sample order is ok.
2. Q: Are you a factory or trading company?
A: We are a manufacturer.
3. Q: Can you accept using our logo?
A: Yes, we can do OEM for you.
4. Q: How can I get the pump?
A: Usually, we suggest express for samples. If the volume reaches
1m³, the Seaway will be better.
5. Q: What’s the warranty period?
A: 1 year.
