PM Series Single Phase Peripheral Pump 0.37-0.75KW PM-45 PM-50
PM-60
Peripheral Water Pump
Peripheral Water Pump Description
The PM series electric peripheral water pump is a single-phase
water pump that consists of three parts: motor, pump, and seal. The
motor is an asynchronous motor. Turbine brass impeller with tight
tolerances between the two cast iron pump faces, the impeller
structure is a swirling type, high-quality mechanical seal to
prevent leakage. Stainless steel shaft, not easy to rust, 100%
copper wire stator core copper wire, make the motor work low
temperature, stable, long working life, with thermal protector,
professional temperature protector to ensure the safe use of the
motor. These have Small size, light-weight, compact structure, easy
installation, high efficiency, energy-saving, safety, and so on.
Suitable for treating clean water without abrasive particles and
fluids that are not chemically corrosive to pump components. It has
various appearances and casings to meet different operational
requirements and can be widely used for water delivery. Its typical
use is from households or small businesses from wells or ponds to
left water. The vortex water pump is also suitable for pressurized
water supply, gardening water, or other Components together form an
automatic water supply system.
Peripheral Water Pump Application
The peripheral water pump has been used extensively for hundreds of
years, where clean water needs to be moved under good pressure.
Peripheral water pump for water transfer, booster pump automatic
fire system, and cooling tower application in fire protection
system. Automatic fire extinguishing systems, small air
conditioning systems, or ancillary equipment are also suitable for
small household water supply and water storage tanks, watering the
garden, automatically dispensing water, and increasing easing
insufficient tap water pressure.
Peripheral Water Pump Data ( 220V/50HZ )
| Type | Power KW HP | Q.Max (L/min) | H.Max (m) | Speed (r.p.m) | Suction. Max (m) | Inlet/Outlet |
| PM-45 | 0.37 | 0.50 | 36 | 36 | 2850 | 9 | 1"X1" |
| PM-50 | 0.55 | 0.75 | 45 | 50 | 1"X1" |
| PM-60 | 0.75 | 1.00 | 50 | 60 | 1"X1" |
Peripheral Water Pump Construction
Pump
Pump Body: Cast iron/Brass/Stainless steel
Impeller: Brass
Mechanical Seal: Carbon
Frant Cover: Cast iron/Cast iron with a brass insert/Stainless
steel
Motor
Single Phase
Heavy-Duty Continuous Work
Motor Housing: Aluminum
Shaft: Carbon Steel
Insulation: Class B / Class F
Protection: IP44 / IP54
Cooling: External Ventilation
Construction and safety standards in compliance with IEC
220V/50HZ.60HZ 110V/50HZ.60HZ 220v.110v/50hz.60hz are available on
request.
Peripheral Water Pump Use Precautions:
These vortex water pumps should be installed in a covered area,
protected against the weather. To operate the pump properly, please
use pumping physical or chemical transfer of clean water or other
liquids or non-corrosive liquids similar to water, without sand or
other impurities.
Max. fluid temperature +60℃
Max. ambient temperature +40℃
Max. solid impurity:0.1%,Max. particle size: 0.2mm.
STRUCTURAL CHARACTERISTICS
| Main Specification | Standard | Optional |
| Transmission medium | Clean Water | |
| Pump body | Cast Iron | |
| Impeller | Brass | |
| Motor housing | Aluminum | |
| Stator&Rotor | 1.Cold-rolled silicon steel sheet by high-speed punching machine.
2. 100% high-quality copper wire |
| Front cover | Cast Iron | Brass plate embedded to avoid impeller jam |
| Bearing | Chinese Best Quality Bearing | NSK, SKF, or on request |
| Mechanical seal | Graphene/Ceramic | Silicon Carbon |
| Shaft | Carbon Steel | Stainless Steel |
| Insulation | Class B | Class F |
| Protection | IP44 | IP54 |
| Voltage | 220-240V Single Phase | On Request |
| Frequency | 50HZ | 60HZ |
| thermal protection | No | Yes |
| Automatic Pressure Control System | No | Yes |
| Cooling Type | External Ventilation | |
| Max. Suction lift | 9M | |
| Max. Fluid Temperature | +60℃ | |
| Max. Environment Temperature | +40℃ | |
| Installation | Horizontal | |
| Connect Type | Thread | |
| CONSTRUCTION AND SAFETY STANDARDS in compliance with IEC |
Peripheral Water Pump GUARANTEE
Guarantee for one year from shipped on board date. During the
guarantee period, our company will provide free easy-damaged spare
parts for problems caused by our quality of production or raw
material, except the damageable spare parts caused by the
customer's incorrect artificial operation. In addition, after
expiration, our company provides cost spare parts for maintenance.
OUR SERVICE
1. Directly factory sale
2. Quick response to 2-8hours, response rates over 92%
3. 24 hours phone call is available. Feel free to contact us.
4. All goods produced by ourselves, we provide one-stop services
from designing, printing to processing. Customers can provide the
design according to your request and sample making. Also, we can
advise how to make the products according to customers' target
prices.
FAQ
1. Q: What’s the MOQ?
A: Trial sample order is ok.
2. Q: Are you a factory or trading company?
A: We are a manufacturer.
3. Q: Can you accept using our logo?
A: Yes, we can do OEM for you.
4. Q: How can I get the pump?
A: Usually, we suggest express for samples. If the volume reaches
1m³, the Seaway will be better.
5. Q: What’s the warranty period?
A: 1 year.
