high-efficiency Hollow Shaft Electric Motor 100L2-4 3KW For
Pressure Pump
Hollow Shaft Motor
Hollow Shaft Electric Motor Description
Mode: 100L2-4 Horsepower:4
RPM:1400 Shaft Size:24mm Hollow
Voltage: 400V Hertz: 50
Motor housing: Aluminum bearing: C&U
Shaft: C#45 Insulation: Class F
Protection: IP55 Installation: B3 Hollow shaft 24mm
Stator&Rotor: 1. Cold-rolled silicon steel sheet by high-speed
punching machine. 2.100% high-quality copper wire
100L2-4 three-phase A.C. aluminum housing motor adopts hollow metal
tube design, selects high-quality materials, optimizes mechanical
design, and maintains standard engines' technical and maintenance
advantages.
Compared to standard motors, a reasonable wall thickness of the
hollow shaft design can save a lot of material under similar load
conditions.
The hollow shaft induction motor has good thermal conductivity, low-temperature rise, low noise,
low current, ample starting torque, high efficiency, and
energy-saving. 100% copper coil, high-quality bearing, tall and
light rotor, the rigorous assembly process
Advantage:
1. High-quality materials, low power loss, low current,
low-temperature rise, good heat dissipation, high efficiency, and
energy-saving.
2. high-quality bearings, rigorous process, low noise operation.
3. Tailored for professional equipment, the shaft extension is
subjected to high-frequency quenching treatment, significantly
improving mechanical strength and seamlessly connecting with the
equipment to realize worry-free operation.
| Main Specification | Standard Optional |
| Motor housing | Aluminum |
| Stator&Rotor | 1. Cold-rolled silicon steel sheet by high-speed punching machine. 2.100% high-quality copper wire |
| bearing | C & U |
| Shaft | C#45 |
| Insulation | Class F |
| Protection | IP55 |
| Voltage | 220/380V Three Phase |
| Frequency | 60HZ |
| thermal protection | Yes |
| Installation | B3 Hollow shaft 24mm |
Hollow Shaft Electric Motor Application
100L2-4 hollow shaft A.C. motors are designed for use with NHD150
pumps and designed for various high-pressure washer machines.
NHD150 pumps can operate at a maximum pressure of 150 bar and with
water temperatures up to 65°C (150F).
This model pump and ZOZHI hollow shaft motor(100L2-4) are excellent
for fitting professional high-pressure washers.
Production line
Production data
| Three-Phase 4 Poles 1500Rpm 50Hz |
| FRAME | POWER | RPM | COSφ | EFF.% | VOLT | AMPERE |
| KW | H.P. | P.F. | | V | A |
| 711-4 | 0.25 | 0.35 | 1370 | 0.73 | 64 | 400 | 0.8 |
| 712-4 | 0.37 | 0.5 | 1350 | 0.74 | 68 | 400 | 1.1 |
| 713-4 | 0.55 | 0.75 | 1350 | 0.75 | 66 | 400 | 1.6 |
| 90L1-4 | 1.5 | 2 | 1400 | 0.82 | 78 | 400 | 3.4 |
| 90L2-4 | 2.2 | 3 | 1400 | 0.79 | 77 | 400 | 5.4 |
| 90L3-4 | 2.6 | 3.5 | 1400 | 0.80 | 78 | 400 | 7.4 |
| 100L1-4 | 2.2 | 3 | 1400 | 0.80 | 81 | 400 | 5.1 |
| 100L2-4 | 3 | 4 | 1410 | 0.80 | 81 | 400 | 6.9 |
| 100L3-4 | 4 | 5.5 | 1420 | 0.80 | 82 | 400 | 9.4 |
| 100M1-4 | 4.4 | 6 | 1420 | 0.82 | 83 | 400 | 10 |
| 112M1-4 | 4 | 5.5 | 1420 | 0.80 | 83 | 400 | 9 |
| 112M2-4 | 5.5 | 7.5 | 1430 | 0.82 | 84 | 400 | 12.1 |
| 112M3-4 | 6.2 | 8.5 | 1425 | 0.82 | 84 | 400 | 13.5 |
| 112L-4 | 7 | 9.5 | 1430 | 0.80 | 85 | 400 | 13.8 |
| 132S1-4 | 5.5 | 7.5 | 1430 | 0.82 | 84 | 400 | 11.7 |
| 132S2-4 | 7.5 | 10 | 1430 | 0.84 | 84 | 400 | 15.4 |
| 132M1-4 | 9.2 | 12.5 | 1430 | 0.90 | 85 | 400 | 17.8 |
| 132M2-4 | 11 | 15 | 1430 | 0.90 | 87 | 400 | 21.3 |
| 132M3-4 | 12.5 | 17 | 1430 | 0.88 | 84 | 400 | 26 |
| 160M1-4 | 15 | 20 | 1450 | 0.86 | 89 | 400 | 29 |
| 160M2-4 | 18.5 | 25 | 1450 | 0.86 | 90 | 400 | 34 |
Hollow Shaft Motor
Guarantee:
Guarantee for one year from shipped on board date. During the
guarantee period, our company will provide free easy-damaged spare
parts for problems caused by our quality of production or raw
material, except the damageable spare parts caused by the
customer's incorrect artificial operation. In addition, after
expiration, our company provides cost spare parts for maintenance.
Our service:
1. Directly factory sale
2. Quick response to 2-8hours, response rates over 92%
3. 24 hours phone call is available; feel free to contact us.
4. All goods produced by ourselves, we provide one-stop services
from designing, printing to processing. Customers can provide the
design according to your request and samples making; also, we can
advise how to make the products according to customers' target
prices.
FAQ:
1. Q: What's the MOQ?
A: We accept one piece.
2. Q: Are you a factory or trading company?
A: We are a manufacturer.
3. Q: Can you accept using our logo?
A: Yes, we can do OEM for you.
4. Q: What's the warranty period?
A: 1 year.
5. Q: What are the terms of payment?
A: T/T. 30% deposit and 70% against the B.L. copy or 100% L.C. at
sight.
