Heavy Duty Self Priming Pump, JET Series Self Priming Sewage Pump
For Household
Self-Priming Pump Description
JET-L series self-priming pumps are high efficient jet pumps with
excellent suction even when there are air bubbles. The pump
consists of a single impeller, centrifugal pump, and jet pipe with
a nozzle. The series pump is particularly suitable for water
supplying in domestic installations, small-scale agriculture
watering, and where self-priming operation is demanded.
Pump body: Cast Iron
Impeller: Brass/ Techno-polymer (P.P.O)/ Aluminum
Mechanical Seal: Carbon/Ceramic/Stainless Steel
Nozzle: P.P.O/Aluminum
JET Pipe: P.P.O/Aluminum
Diffuser: P.P.O/Aluminum/Cast Iron
Self-Priming Pump Application
The JET series is composed of a centrifugal pump and a jet pump
(injector). The centrifugal pump is generally installed on the
ground. The jet pump is installed under the well. The working
principle is that the normal pressurized liquid passes through the
nozzle to cause low- pressure so that the liquid in the well is
sucked into the centrifugal pump. The wellhead is discharged
through a centrifugal pump. Because the JET series can pump water
from wells 10 meters to 50 meters deep (and any other self-priming
pump and clean water pump will not exceed 10 meters) and will not
be overloaded, The electric water pump suitable for clean water and
non-corrosive liquids, it is widely used in wells in low water
areas, factories, domestic water, small irrigation systems,
pressurization, flushing, and water transfer.
Self-Priming Pump Data
| Model | Power | Current | Capacitor | H.Max | Q.Max | Pipe Size |
| (HP) | (W) | (A) | (UF) | (m) | (L/min) | (m) |
| JET60-L | 0.5 | 370 | 2.9 | 12 | 30/40 | 65/45 | 1”x1” |
| JET80-L | 0.75 | 550 | 3.5 | 15 | 34/45 | 65/50 | 1”x1” |
| JET100-L | 1 | 750 | 4.5 | 20 | 42/52 | 65/50 | 1”x1” |
| JETS-60 | 0.5 | 370 | 2.9 | 12 | 30/40 | 65/45 | 1”x1” |
| JETS-80 | 0.75 | 550 | 3.5 | 15 | 34/45 | 65/50 | 1”x1” |
| JETS-100 | 1 | 750 | 4.5 | 20 | 42/52 | 65/50 | 1”x1” |
| JET60-P | 0.5 | 370 | 2.9 | 12 | 30/40 | 65/45 | 1”x1” |
| JET80-P | 0.75 | 550 | 3.5 | 15 | 34/45 | 65/50 | 1”x1” |
| JET100-P | 1 | 750 | 4.5 | 20 | 42/52 | 65/50 | 1”x1” |
| JSW60 | 0.5 | 370 | 2.9 | 12 | 30/40 | 65/45 | 1”x1” |
| JSW80 | 0.75 | 550 | 3.5 | 15 | 34/45 | 65/50 | 1”x1” |
| JSW100 | 1 | 750 | 4.5 | 20 | 42/52 | 65/50 | 1”x1” |
Self-Priming Pump Construction
Pump
Pump Body: Cast iron/Brass/Stainless steel
Impeller: Brass/P.P.O
Mechanical Seal: Carbon
Diffuser Nozzle: P.P.O
Jetpipe: P.P.O
DIEEUSSOR:P.P.O/Cast Iron
Motor
Single Phase
Heavy-Duty Continuous Work
Motor Housing: Aluminum
Shaft: Carbon Steel / Stainless Steel
Insulation: Class B / Class F
Protection: IP44 / IP54
Cooling: External Ventilation
Self-Priming Pump Precautions
A. Before use, check whether the bolts in the electric pump are
loose or not. The cable and plug are intact. The insulation
resistance of the motor should be greater than 2 megohms.
B. To prevent electric shock, it is necessary to install
corresponding safety measures such as leakage circuit breaker or
electric shock protection device and reliably ground
C. The voltage usage range is between 180V and 230V. Otherwise, the
service life of the motor will be shortened or burned out. If the
electric pump is used far away from the power supply, you should
thicken the power transmission line. Otherwise, the voltage will
drop, and it will not work.
Self Priming Pump guarantee:
Guarantee for one year from shipped on board date. During the
guarantee period, our company will provide free easy-damaged spare
parts for problems caused by our quality of production or raw
material, except for the damageable spare parts caused by the
customer's incorrect manufacturing operation. In addition, after
expiration, our company provides cost spare parts for maintenance.
Self Priming Pump Our service:
1). We are happy that the customer gives us some suggestions for
price and products.
2). Any questions, please let us know it in the first by E-mail or
Telephone. We can deal with them for you in time.
3). Offer our customers the lowest prices. Streamline the buying
and paying processes.
4). Deliver goods to our customers all over the world with speed
and precision.
5). Ensure the excellent quality of our products.
6). 12 months FREE warranty.
7). Accept OEM
FAQ
1). Q: How about the MOQ?
A: Usually, it is 50 PCS for each model.
2). Q: Are you a factory or a trading company?
A: we make water pumps, motors, alternators, and diesel generators
since 2006.
3). Q: Can you accept to use our logo?
A: Yes, we can. Any OEMs are welcome!
4). Q: What are your payment terms?
A: 30% deposit by T/T in advance, pay 70% balance against B/L copy.
5). Q: How about the delivery time?
A: Usually, 10-30days. But it depends on your order quantity.
6). Q: How about the warranty?
A: 1 year from shipped on board date.
